Hitachi CP-AX3005 User Manual

82
Presentation tools
PC-LESS Presentation (continued)
The setup menu for the selected image
Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute
the functions as follows.
Item Functions
RETURN Press the ► cursor button or ENTER to return to the Thumbnail screen.
START
Switch to ON to set the selected image as the rst image in the
Slideshow. This setting information will be saved in the “playlist.txt” le
(
89).
STOP
Switch to ON to set the selected image as the last image in the
Slideshow. This setting information will be saved in the “playlist.txt” le
(
89).
SKIP
Switch to ON to skip the selected image in the Slideshow. This setting
information will be saved in the “playlist.txt” le (
89).
ROTATE
Press the ► cursor or ENTER button to rotate the selected still image
90 degrees clockwise. This setting information will be saved in the
“playlist.txt” le (
89).
You can control the images on the Thumbnail screen with the remote control,
control panel or Web Remote Control. The following functions can be supported
while the Thumbnail is displayed.
Operating by buttons or keys
Button operation
Functions
The remote
control
Control panel
Web Remote
Control
▲/▼/◄/► ▲/▼/◄/► [▲]/[▼]/[◄]/[►] Move cursor
PAGE UP
PAGE DOWN
-
[PAGE UP]
[PAGE DOWN]
Switches pages
ENTER INPUT [ENTER]
• Displays the selected image
on the Full Screen mode when a
cursor is on a thumbnail image.
• Displays the setup menu
(

below) for the selected image
when a cursor is on a thumbnail
image number.

Hitachi CP-AX3005 Specifications

General

Brand	Hitachi
Model	CP-AX3005
Category	Projector
Language	English