To Next Page

To Previous Page

Operating

Adjusting the volume

Use the VOLUME +/VOLUME - buttons to adjust the volume.

A dialog will appear on the screen to aid you in adjusting the

volume. If you do not do anything, the dialog will automatically

disappear after a few seconds.

Ɣ When

is selected for current picture input port, the volume

adjustment is disabled. Please see AUDIO SOURCE item of

AUDIO menu (



36).

Ɣ When the projector is in the standby mode, the volume can be

adjusted if

is not selected for the AUDIO OUT STANDBY and NORMAL is

selected to the STANDBY MODE in the SETUP menu (



35).

Press MUTE button on the remote control.

A dialog will appear on the screen indicating that you have

muted the sound.

To restore the sound, press the MUTE, VOLUME + or

VOLUME - button. Even if you do not do anything, the dialog

will automatically disappear after a few seconds.

Temporarily muting the sound

Ɣ When is selected for current picture input port, the sound

is always muted. Please see AUDIO SOURCE item of

AUDIO menu (



36).

Ɣ C.C. (Closed Caption) is automatically activated when sound is muted and an

input signal containing C.C is received. This function is available only when

the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPUTER

IN, and when AUTO is selected for DISPLAY in the C.C. menu under the

SCREEN menu (



41).

VOLUME +/- button

MUTE button

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT SEARCH

BLANK

MUTE

MY BUTTON

POSITION

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

VOLUME

DOWN

࡯

OFF

㧗

FREEZE