EASY MENU
From the EASY MENU, items shown in the table
below can be performed.
Select an item using the Ÿ/ź cursor buttons. Then
perform it according to the following table.
Item Description
ASPECT
Using the Ż/Ź buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE
menu
(
29).
KEYSTONE
Using the Ż/Ź buttons corrects the vertical keystone distortion.
See the KEYSTONE item in SETUP menu (
34).
PICTURE MODE
Using the Ż/Ź buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL
Ù
CINEMA
Ù
DYNAMIC
Ù
BOARD(BLACK)
DAYTIME
Ù
WHITEBOARD
Ù
BOARD(GREEN)
GAMMA COLOR TEMP
NORMAL 1 DEFAULT 2 MID
CINEMA 2 DEFAULT 3 LOW
DYNAMIC 3 DEFAULT 1 HIGH
BOARD(BLACK) 4 DEFAULT 4 Hi-BRIGHT-1
BOARD(GREEN) 4 DEFAULT 5 Hi-BRIGHT-2
WHITEBOARD 5 DEFAULT 2 MID
DAYTIME 6 DEFAULT 6 Hi-BRIGHT-3
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and
COLOR TEMP (
26, 27 ) items in PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
(continued on next page)
To Next Page
Loading...
Need help?
General
