Remember that incorrect network settings on this 
projector may cause trouble on the network. Be sure 
to consult with your network administrator before 
connecting to an existing access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the 
projector or remote control, and press the ► cursor button on the projector or 
remote control, or ENTER button on the remote control to execute the item. Then 
perform it according to the following table.
See the Network Guide for details of NETWORK operation.
NETWORK menu
• To use the wireless network function of this projector, the designated 
USB wireless adapter that is sold as an option is required. Do not use any 
extension cable or device when connecting the adapter to the projector.
• The projector does not allow both wireless and wired LAN to be connected to 
the same network. 
• Do not set the same network address for both wireless and wired LAN.
• If you are not utilizing SNTP (
3.1.8 Date/Time Settings in the Network 
Guide), then you must set the DATE AND TIME during the initial installation.
• The network communication control is disabled while the projector is in 
standby mode if the STANDBY MODE item of SETUP menu is set to SAVING. 
Please connect the network communication to the projector after setting the 
STANDBY MODE to NORMAL (
54
).
NOTE
Item Description
WIRELESS 
SETUP
Selecting this item displays the WIRELESS 
SETUP menu for the wireless LAN.
Use the ▲/▼ buttons to select an item, 
and the ► or ENTER button on the remote 
control to perform the item.
MODE
Use the ▲/▼ buttons to select the mode of the 
network communication system. Select according 
to the settings of your computer.
AD HOC 
ó
 INFRASTRUCTURE
To save the setting, press the ► button.
• When ADHOC is selected, IEEE802.11 n cannot 
be used.
• If ADHOC is set to MODE while one of WPA-
PSK or WPA2-PSK is selected in ENCRYPTION, 
the ENCRYPTION (
76) setting switches to OFF 
automatically.
(continued on next page)