50
Operating
4. Selecting Blending Level
Select BLENDING LEVEL with ▲/▼ buttons.
[1-25] can be selected with
◄/► buttons
.
Adjust the brightness of Blending Region according to the settings.
5. DIMMING LEVEL
Adjusts the brightness of the projectors which are using Blending.
Using the ◄/► buttons to adjust the dimming level.
6. WHITE BALANCE
Adjusts the white balance of the whole screen.
6.1. OFFSET
OFFSET adjustments change the color intensity on the whole tones.
6.2. GAIN
GAIN adjustments mainly affect color intensity on the brighter tones.
7. BLACK LEVEL
Adjusts black color level of the projectors which are using Blending.
Adjusts the adjustment value of R/G/B at the same time when W is selected.
When each of R/G/B is selected, the adjustment value of R/G/B can be
adjusted respectively.
• The positional deviation of the screen may occur after installing
the projector over time. In that case, perform the screen adjustment again to
correct the positional deviation.
NOTE
To Next Page
Loading...
