8
Setting up
Setting up
Install the projector according to the environment and manner the projector will be
used in.
For the case of installation in a special state such as ceiling mount, the speci ed
mounting accessories and service may be required. Before installing the projector,
consult your dealer about your installation.
Secure a clearance of 50cm or greater between the exhaust vents and walls, and
a clearance of 30cm or greater between the intake vents and walls. Assume that
there is enough clearance in the front, back, and top of the projector in the gure
below.
(continued on next page)
50cm or greater
Intake
vents
Exhaust
vents
30cm or greater
Installing the lens unit
See the manual of the optional lens.
To Next Page
Loading...
Need help?
General