82
SCREEN menu
Item Description
AUTO BLANK
Using the ▲/▼ buttons switches the mode for the AUTO BLANK
screen.
BLUE
ó
WHITE
ó
BLACK
• To avoid remaining as an afterimage, displayed image will change
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When MyScreen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ó
ORIGINAL
ó
OFF
MyScreen :
Screen can be registered by the MyScreen item (
83).
ORIGINAL : Screen preset as the standard screen.
OFF : Plain black screen.
• To avoid remaining as an afterimage, the START UP screen will
change to the AUTO BLANK screen after several minutes.
• When the ON is selected to the MyScreen PASSWORD item in
the SECURITY menu (
102), the START UP is fixed to MyScreen.
(continued on next page)
To Next Page
Loading...
