54
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
RESPONSE LIMIT TIME
This menu is available only when the NETWORK
BRIDGE is selected for the COMMUNICATION
TYPE and the HALF-DUPLEX is selected for the
TRANSMISSION METHOD.
Select the time period to wait for receiving response
data from other devise communicating by the
NETWORK BRIDGE and the HALF-DUPLEX through
the
CONTROL OUT port.
OFF
1s
2s
3s
OFF: Select this mode if it is not required to check the
responses from the devise that the projector sends data
to. In this mode, the projector can send out data from
the computer continuously.
1s/2s/3s: Select the time period to keep the projector
waiting for response from the device that the projector
sends data to. While waiting the response, the projector
does not send out any data from the
CONTROL OUT
port.
BYTES INTERVAL TIMEOUT
This menu is available only when NETWORK BRIDGE
is selected for the COMMUNICATION TYPE and HALF-
DUPLEX is selected for the TRANSMISSION METHOD.
Select the blank time length to judge that the response
data has fi nished in the communicating in the condition
of the NETWORK BRIDGE and the HALF-DUPLEX
through the
CONTROL OUT port.
50ms
100ms
150ms
200ms
•
50ms is selected as the default setting.
NOTE
• OFF is selected as the default setting.
NOTE
To Next Page
Loading...
Need help?
General