13
Installation
8. After pressing the ► button above, a dia-
log to conrm whether or not the setting is
saved is displayed.
Press the ► button to complete the setting.
(
23
)
6. Use the ▲/▼ buttons to point at STACK
MODE, and press the ► button to display
STACK MODE dialog.
Point at MAIN with the ▲/▼ buttons, and
press the ◄ button to return to the previous menu.
7. Use the ▲/▼ buttons to point at LAMP
MODE, and press the ► button to display
LAMP MODE dialog.
Point at DUAL with the ▲/▼ buttons, and press the ► button.
Installation of the second projector (Set B) - Setting up Set B (continued)
To Next Page
Loading...
