13
Connecting with your devices (continued)
To use network functions of the projector, connect the LAN port with the
computer's LAN port, or with an access point that is connected to the computer
with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function,
also connect the CONTROL port and an RS-232C port of the external device to
communicate as a network terminal. See the User's Manual - Network Guide for
details of the network functions.
Setting up
►Before connecting the projector to a network system be sure
to obtain the consent of the administrator of the network (
60).
►
Do not connect the LAN port to any network that might have the excessive voltage.
CAUTION
• If an oversized USB storage device blocks the LAN port, use a USB
extension cable to connect the USB storage device.
NOTE
MIC
HDMI
USB
TYPE B
USB
TYPE A
DC5V 0.5A
LAN
COMPUTER IN1
COMPUTER
IN2
VIDEO
S-VIDEO CONTROL
MONITOR OUT
AUDIO
OUT
IN3
IN1
IN2
L
R
L
R
Y
Cb/Pb
Cr/Pr
RS-232C
LAN
Access point
Computer
To Next Page
Loading...
Need help?
General