79
Presentation tools
PC-LESS Presentation (continued)
Slideshow mode
The following operations can be accessible while the Slideshow is displayed.
* These operations are not accessible while the projector OSD is displayed.
• It is not possible to change the input port by using the INPUT button
when the Thumbnail screen, Slideshow, or Full Screen is displayed.
• When the Slideshow mode is set to ONE TIME, the last slide of the
presentation will be held on screen till the ENTER button on the remote control
or Web Remote Control, or INPUT button on the projector is pushed.
NOTE
You can start this function from the Slideshow menu. To display the Slideshow
menu, select the SLIDESHOW button in the Thumbnail mode and press the
ENTER button on the remote control or INPUT button on the projector.
Button operation
Functions
The remote
control
The keypad
on the
projector
Web Remote
in web browser
software.
ENTER INPUT ENTER Displays thumbnail
The Slideshow mode displays images in full screen and switches the images at
intervals set in INTERVAL on the Thumbnail screen menu (
74).
To Next Page
Loading...
Need help?
General