Hitachi CP-X2011N User Manual

78
Presentation tools
PC-LESS Presentation (continued)
The Full Screen mode shows a full display image. To display in Full Screen mode,
select an image in the Thumbnail screen. Then press the ENTER button on the
remote control or the INPUT button on the keypad, or click [ENTER] on the Web
Remote Control.
Full Screen Mode
Button operation
Functions
The remote
control
The keypad
on the
projector
Web Remote
in web browser
software.
▼
►
or
PAGE DOWN
▼
or
►
DOWN, RIGHT
or
PAGE DOWN
Shows the next picture.
▲
◄
or
PAGE UP
▲
or
◄
UP, LEFT
or
PAGE UP
Shows the previous picture.
ENTER INPUT ENTER Displays Thumbnail.
• These operations are not accessible while the projector OSD is displayed.
• It is not possible to change the input port by using the INPUT button when the
Thumbnail screen, Slideshow, or Full Screen is displayed.
NOTE
The following functions can be supported in the Full Screen mode.
Full screen display

Hitachi CP-X2011N Specifications

General

Brand	Hitachi
Model	CP-X2011N
Category	Projector
Language	English