Hitachi CP-X2011N User Manual

65
NETWORK menu
Item Description
PRESENTATION
(continued)
MULTI PC
MODE
(continued)
• To change from Multi PC mode to Single PC mode,
select one of computers in the dialog using the
▲/▼/◄/► buttons and press the ENTER or INPUT
button.
Press the ► button to choose OK, and then press
ENTER or INPUT again. The image for the selected
computer is displayed on full screen.
• To change from Single PC mode to Multi PC mode,
press ► button to choose OK in the dialog and press
the ENTER or INPUT button.
The display mode is changed.
•
For details on how to switch
the display mode to Multi PC
mode on your computer, see
the section Switching the
display mode in the User's Manual – Network Guide.
• The Presenter mode setting of the selected
computer becomes valid when the display mode is
changed to Single PC mode.
Also, the Presenter mode setting
becomes invalid when the
display mode is changed to Multi
PC mode, regardless the setting
on the computers.
For details, see the section Presenter mode in the
User's Manual – Network Guide.
DISPLAY
USER NAME
Selecting this item displays the user name. This
function helps you identify from which computer the
current image is sent.
• You can set user names for each computer on
“LiveViwer”.
For details, see the section Display User Name in
the User's Manual – Network Guide.
(continued on next page)

Hitachi CP-X2011N Specifications

General

Brand	Hitachi
Model	CP-X2011N
Category	Projector
Language	English