Hitachi CP-X615 - Page 22

22
3.1 Conguring and controlling the projector via a web browser (continued)
3. Management with Web browser software
The daily and weekly event items are shown below.
Item Daily & Weekly Description
Schedule Click [Enable] check box to enable the schedule.
Schedule List Displays the current schedule.
The specic date event items are shown below.
Item Specic date (No.1-5) Description
Schedule
Click [Enable] check box to enable specic date (No.1-5)
schedule.
Date (Month/Day) Congures the month and date.
Schedule List Displays the current specic date (No.1-5) schedule.
Click [Apply] button to save the settings.
To add additional functions and events, click [Add] button and set the following
items.
Item Description
Time Congures the time to execute commands.
Command
[Parameter]
Congures the commands to be executed.
Power Congures the parameters for power control.
Input Source Congures the parameters for input switching.
Display Image Congures the parameters for display of transfer image data.
Click [Register] button to add new commands to the Schedule List.
Click [Delete] button to delete commands from the Schedule List.
Click [Reset] button to delete all commands from the Schedule List.
• After the projector is moved, check the date and time set for the
projector before conguring the schedules. Strong shock may make the date
and time settings (23) get out of tune.
NOTE