22
Operating
BLANK LASER
1.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in SCREEN
menu (
38).
To exit from the blank screen and return to the input signal
screen, press the BLANK button again.
Temporarily blanking the screen
● The projector automatically returns to the input signal screen when one of the
projector’s buttons or the remote control buttons (except ASPECT, POSITION,
MAGNIFY or FREEZE button, also except MY BUTTON1/2 if AUTO KEYSTONE
or MY MEMORY or PICTURE MODE is assigned to (44)) is pressed.
•
The sound is not connected with the blank screen function. If necessary,
set the volume or mute first.
NOTE
►If you wish to have a blank screen while the projector's lamp is
on, use the BLANK function above. Any other method of blocking the projection
light, such as attaching something to the lens or placing something in front of the
lens, may cause the damage to the projector.
CAUTION
To Next Page
Loading...
Need help?
General
