Item Description
SETUP
(continued)
TIME
DIFFERENCE
Use the ▲/▼ buttons
to enter the TIME
DIFFERENCE.
Set the same TIME
DIFFERENCE as the
one set on your PC.
If unsure, consult
your IT manager.
Use the ◄ button to return to the menu after
setting the TIME DIFFERENCE.
DATE AND TIME
Use the ▲/▼/◄/►
buttons to enter the Year
(last two digits), Month,
Date, Hour and Minute.
• The projector will override this setting and
retrieve DATE AND TIME information from the
Time server when SNTP is enabled.
(
Date/Time Settings of the User’s Manual
- Network Guide)
MODE
Use the ▲/▼ buttons to
select the mode of the
network communication
system. Select it according
to the setting of your PC.
ADHOC
ó
INFRASTRUCTURE
CH
Use the ▲/▼ buttons to
select the channel of the
wireless LAN while using
it. Select it according to the
setting of your PC.
The channels 1 to 11 are available.
• The available channels would be various
depending on a country. In addition, wireless
network card might be required due to the standard.
ENCRYPTION
Use the ▲/▼ buttons
to select the encryption
method to be used.
WPA2-PSK(AES)
ó
WPA-PSK(AES)
ó
WPA-PSK(TKIP)
OFF
ó
WEP 64bit
ó
WEP 128bit
(continued on next page)
To Next Page
Loading...
