Hitachi DH 22PH - Competitive Product Comparison; Specification Comparison

-5-
+
Anchor setting adapter
(SDS-plus shank)
++
(2) Anchor setting (hammering only)
Anchor setting bar
Part name
Overall
length (mm)
Code No. Part name
Overall
length (mm)
Code No.
W-1/4 Anchor setting adapter-A 260 302976 W-1/4 Anchor setting adapter-B 260 302979
W-5/16 Anchor setting adapter-A 260 302975 W-5/16 Anchor setting adapter-B 260 302978
W-3/8 Anchor setting adapter-A 160 303621 W-3/8 Anchor setting adapter-B 160 303622
W-3/8 Anchor setting adapter-A 260 302974 W-3/8 Anchor setting adapter-B 260 302977
Internal cone type External cone type
(3) Bolt placing operations with chemical anchor (rotation + hammering)
(Standard sockets available on the market) 12.7-mm (1/2”) Chemical anchor adapter (SDS-plus shank)
19-mm (3/4”) Chemical anchor adapter (SDS-plus shank)
Part name Code No.
12.7-mm (1/2”) Chemical anchor adapter 303044
19-mm (3/4”) Chemical anchor adapter 303045
(4) Crushing operation (hammering only)
Square bull point
(SDS-plus shank)
Code No. 316656
Bull point (round type)
(SDS-plus shank)
+
Code No. 303046
+