Chapter 3 Programming
3 – 31
Write values
Prepare values for the variables by clicking at [Prepared value] or double clicking at ladder symbols.
Choose the menu [Debug]-[Write values] or press [Ctrl + F7]. The prepared values will be transferred to PLC.
Online change
To change your program in running CPU (online change), you have to logout at first. After program changing, choose
[Login] again. You will have 3 options as below.
Login with online change: Only incremental program is downloaded without CPU stop.
Login with download: Whole the program is downloaded. CPU is forced to stop.
Login without any change: New program is not downloaded.
To Next Page
Loading...
