OPERATOR’S STATION
1-14
SEAT BELT (EX50u)
CAUTION: Be sure to use the seat belt when op-
erating the machine.
Before operating the machine, be sure to exam-
ine seat belt (1), buckle (2), or attaching hardware.
Replace seat belt (1), buckle (2), or attaching
hardware if they are damaged, or worn.
Replace seat belt (1) every three years, regard-
less of appearance.
Seat Belt
1. Confirm that seat belt (1) is not twisted and securely
insert the end of seat belt (1) into buckle (2).
Lightly pull on the belt to confirm that the buckle
latches securely.
2. Seat belt (1) is automatically adjusted so that the belt
is snug but comfortable.
3. Push button (3) on buckle (2) to unfasten seat belt
(1).
M586-01-041
M586-01-042
M586-01-043
1 2
3
3
To Next Page
Loading...
