Hitachi F700 - VSP F700 Environmental Specs: Humidity and Vibration

State Controller FMD tray
Operating 50°F to 104°F
(10°C to 40°C)
DKC-F810I-1R6FN/3R2FN/6R4FN/7R0FP/14RFP
drive is installed: 50°F to 104°F (10°C to 40°C)
Non-operating 14°F to 122°F
(-10°C to 50°C)
14°F to 95°F (-10°C to 35°C)
Transport,
storage
-22°F to 140°F
(-30°C to 60°C)
-22°F to 122°F (-30°C to 50°C)
Temperature
change rate
(°C/h)
10°C or less
Humidity
State FMD tray
Operating (%) 8 to 80
Non-operating (%) 8 to 90
Transport, storage (%) 5 to 95
Maximum wet bulb temperature (°C) 29°C (non-condensing)
Vibration
State FMD tray
Operating
(m/s
2
)
2.5 or less (5 to 300Hz)
Within 5 seconds (resonance point: 10 Hz
or less)
Non-operating
(m/s
2
)
5.0 or less at (5 Hz to 300 Hz: no damage
to product)
9.8 (1.0 G): Ensure own safety with fall
prevention.
Within 5 seconds (resonance point: 10 Hz
or less)
Transport (packed)
(m/s
2
)
5.0 m/s or less
Environmental specications
Appendix B: System specications
Hitachi Virtual Storage Platform F700 Hardware Reference Guide 54