Need help?Do you have a question about the Hitachi F800 and is the answer not in the manual?
General| Category | Storage |
|---|---|
| Cache Memory | Up to 256 GB |
| Model | F800 |
| Host Interface | Fibre Channel |
| Drive Interface | SAS |
| RAID Levels | RAID 0, 1, 5, 6, 10 |
| Power Supply | Redundant power supplies |
Details the VSP F800 system architecture, enclosure, and supported drive trays.
Lists the key features and capabilities of the VSP F800 storage system.
Introduces the CBLH controller, its components, and operational status indicators.
Covers LEDs and connectors for 4-port Fibre Channel interface boards supporting various speeds.
Explains the LEDs and connectors for 2-port Fibre Channel interface boards operating at 16-Gbps.
Describes the FMD drive trays, their components, and interface capabilities.
Explains the role of the SVP, its ports, and emergency login procedures.
Describes the LEDs, reset button, and power button on the physical SVP's front panel.
Details the power socket and LAN ports on the physical SVP's rear panel.
Lists the hardware specifications of the SVP, including dimensions, processor, memory, and OS.
Outlines the procedure for safely powering down the storage system.
Details mechanical aspects like controller chassis, drive trays, NAS module, drive size, and data capacity.
Provides detailed electrical specifications including frequency, current, power, and heat values.
Outlines environmental requirements for temperature, humidity, vibration, altitude, and noise.
Lists the IEEE and RFC standards applicable to iSCSI management and data ports.
Details iSCSI specifications including target function, ports, connections, and protocols.
To Next Page