Number
Item Description
1, 2
ACT LED Green: Normal operation.
Blink: Drive is being accessed.
Slow blink:
•
• DKC-F810I-1R6FN/3R2FN/
6R4FN: Flash module drive
built-in capacitor is charged.
If the storage system is
turned on, the LED stops
blinking when the capacitor
is finished charging
(approximately two
minutes).
Note: ACT indicator is only
printed on some types of FMDs.
ALM LED Red: Drive stopped due to a
failure and can be replaced.
Note: ACT indicator is only
printed on some types of FMDs.
3
POWER, READY, and LOCATE LEDs Green: Drive tray is powered
on.
Green: Drive tray is
operational.
Amber:
• Indicates the location of the
chassis.
Storage system drive trays 35
Hitachi Virtual Storage Platform F800 Hardware Reference Guide
To Next Page
Loading...
