Third-party rack support for VSP Gx00 models
The VSP Gx00 models support third-party racks that meet Hitachi Data
Systems specifications.
Observe the following mounting guidelines for third-party racks:
• The VSP Gx00 models support any 4-post, EIA-310-D compliant rack that
has adequate airflow and weight capacity.
• PDUs must be mounted properly, with no serviceability issues. The PDU
receptacles must face toward the back (not toward each other). The area
behind the storage system and between the vertical 19-inch mounting
posts must be free of PDUs and cable loops.
Hitachi Universal V2 Rack rail kits
Use rail kits to mount the Hitachi Virtual Storage Platform family storage
system in a Hitachi Universal V2 Rack.
The following tables list the rail kit information for the specified storage
systems.
Table 3 Rail kits for VSP Gx00 models
Rail kit
Hitachi Universal V2 Rack Third-party rack
Controller UNI
1
UNI
1
DBS, DBL, and DBF drive trays CGR
2
UNI
1
DB60 dense intermix drive tray Use the rail kit supplied with the DB60 dense intermix drive tray.
SVP server Use the rail kit supplied with the SVP server.
Notes:
1. UNI: Universal rail kit A34V-600-850-UNI.
2. CGR: Corner guide rail kit A3BF-HK-GL-740-1.
Hitachi Universal V2 Rack accessories
The following table provides rack accessory information for VSP G series
storage systems.
Table 4 Accessories for the Hitachi Universal V2 Rack
Storage system
Front door Rear door Side panels
VSP Gx00 models
Optional, must be
ordered separately
(A3BF-DR).
Included with
rack
Not included with rack, must
be ordered separately. A
quantity of two must be
ordered per rack (A3BF-Z-
PAN-1200).
114 Third-party racks
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
To Next Page
Loading...
