To Next PageTo Next Page
Need help?Do you have a question about the Hitachi Virtual Storage Platform G400 and is the answer not in the manual?
General| Model | Virtual Storage Platform G400 |
|---|---|
| Host Connectivity | Fibre Channel, iSCSI, FCoE |
| Data Reduction Features | Deduplication, Compression |
| Operating System Compatibility | Windows, Linux, VMware, AIX, HP-UX, Solaris |
| Form Factor | Rack-mountable |
| Power Supply | Dual redundant power supplies |
| Cooling | Redundant cooling fans |
| Warranty | 3 years |
| Category | Storage |
| Drive Types | SSD |
| Installed Devices / Modules Qty | 2 (controllers) |
| RAID Levels | RAID 1, RAID 5, RAID 6, RAID 10 |
| Controller Type | Dual active-active controllers |
| Host Interfaces | 16 Gbps FC, 10 Gbps iSCSI |
| Maximum Memory | Up to 512 GB per controller pair |
Details the specific product versions covered by this document revision.
Information about requirements, restrictions, and updates for the product.
Provides a high-level view of the storage system management software architecture.
Describes system administration tasks for VSP Gx00/Fx00 models, including tools like HSA, Device Manager, and NAS Manager.
Explains the Storage Advisor dashboard's tools for configuring, managing, and monitoring storage systems.
Details storage system resources like systems, servers, ports, pools, and volumes in Storage Advisor.
Describes how to perform administration tasks using the maintenance utility.
Steps for configuring Storage Advisor on a virtual machine.
Steps to set up a client computer and log in to Device Manager - Storage Navigator.
Lists hardware and software requirements for Windows and UNIX/Linux management clients.
Details on enabling secondary windows and logging into Device Manager - Storage Navigator.
Procedures for changing passwords and adding SVPs to trusted sites.
Instructions on how to start the maintenance utility from different management tools.
Summarizes key system administration tasks and the tools used for them.
Procedures for changing system settings like date/time and network communication.
Details on changing system date and time of NAS modules.
Information on viewing, changing, and initializing SVP port numbers.
Procedures for backing up and restoring Device Manager - Storage Navigator configuration files.
Steps to change the administrator password via the maintenance utility.
Details required roles for operating specific windows in the Maintenance Utility.
Procedures for creating, disabling, removing, backing up, and restoring user accounts.
Information on changing user group permissions and assignments.
Explains creating, managing, and using resource groups for system configuration.
Procedure for configuring the firewall to allow TCP/IP port access.
Covers registering, deleting HCS certificates and managing SSL certificates.
Steps for updating signed certificates and releasing passphrases.
Details on configuring authentication servers and authorization servers.
Guides for configuring Active Directory and RADIUS servers for authentication.
How to view and configure email, Syslog, and SNMP alert notifications.
Configuration of general alert notification settings, including report types.
Detailed settings for email, Syslog, and SNMP alert notifications.
Procedures for sending test email, Syslog, and SNMP trap messages.
Steps to monitor failure information by outputting it to the Windows event log.
Introduces license key management, including types and overview.
Describes permanent, term, temporary, and emergency license key types.
Guidance on estimating licensed capacity for software applications.
Procedures for installing, enabling, disabling, and removing licenses.
Procedures for configuring audit log settings and setting up a syslog server.
Instructions for exporting audit logs and sending test messages to syslog.
Overview of standard and custom reports available via Device Manager - Storage Navigator.
Steps to view reports in table or HTML format and create new configuration reports.
Procedure for collecting dump files for troubleshooting and system configuration.
Describes how reports are displayed in table format and how to sort data.
Provides examples and descriptions for CHAP Users, Disk Boards, and Host Groups reports.
Details the items and content found in Logical Devices and LUNs reports.
Describes MP Units, Parity Groups, and Physical Devices reports.
Details the items and content for Ports and Power Consumption reports.
Introduces CSV files and describes AllConf.csv.
Explains System Option Modes (SOMs) for tailoring storage system requirements.
Details specific SOM modes, their categories, descriptions, and default settings.
Glossary terms from 2DC to cache logical partition.
Glossary terms from data drive to HDD.
Glossary terms from in-system replication to key management server.
Glossary terms from LBA to modify mode.
Glossary terms from OPEN-V to pair.
Glossary terms from quick format to RCU.
Glossary terms from SAS to SOM.
Glossary terms from T-VOL to VDEV.
Glossary terms from volume migration to volume shredding.
