What to do if Hitachi Universal Platform V Storage displays an error message?
If an error message appears on your Hitachi Storage, first identify the error type using the SIM codes section. Then, if possible, address and resolve the underlying cause of the error.
What to do in case of emergency with Hitachi Universal Platform V?
In case of an emergency like fire, earthquake, or flood affecting your Hitachi Storage, immediately pull the emergency power-off (EPO) switch.
What to do if Hitachi Storage console displays a fence message?
If a fence message appears on the console of your Hitachi Storage, check for a failed storage path. If a failed path exists, toggle the RESTART switch and retry the operation. If the fence message reappears, then the cause is different.
Information on safety, environmental regulations, and compliance statements for the storage system.
Provides a summary of key hardware and system specifications for USP V/VM.
Detailed specifications for the Universal Storage Platform V hardware and configuration.
Detailed specifications for the Universal Storage Platform VM hardware and configuration.
Details the main hardware components of the USP V/VM storage systems.
Details system option modes, host modes, and host mode options for system tailoring.
Provides general troubleshooting steps and error condition resolution for the storage system.
Explains service information messages (SIMs), their severity, and reporting.
Provides guidance and contact information for technical support.
To Next Page
General