EasyManuals Logo

Hitachi Universal Storage Platform V User Manual

Hitachi Universal Storage Platform V
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
xii Preface
Hitachi Universal Storage Platform V/VM User and Reference Guide
Convention for Storage Capacity Values
Physical storage capacity values (e.g., data drive capacity) are calculated
based on the following values:
1 KB = 1,000 bytes
1 MB = 1,000
2
bytes
1 GB = 1,000
3
bytes
1 TB = 1,000
4
bytes
1 PB = 1,000
5
bytes
Logical storage capacity values (e.g., logical device capacity) are calculated
based on the following values:
1 KB = 1,024 (2
10
) bytes
1 MB = 1,024 KB or 1,024
2
bytes
1 GB = 1,024 MB or 1,024
3
bytes
1 TB = 1,024 GB or 1,024
4
bytes
1 PB = 1,024 TB or 1,024
5
bytes
1 block = 512 bytes
Getting Help
If you need to call the Hitachi Data Systems Support Center, make sure to
provide as much information about the problem as possible, including:
The circumstances surrounding the error or failure.
The exact content of any message(s) displayed on the host system(s).
The exact content of any message(s) displayed by Storage Navigator.
The service information messages (SIMs), including reference codes and
severity levels, displayed by Storage Navigator and/or logged at the host.
The Hitachi Data Systems customer support staff is available 24 hours/day,
seven days a week. If you need technical support, please call:
United States: (800) 446-0744
Outside the United States: (858) 547-4526

Table of Contents

Other manuals for Hitachi Universal Storage Platform V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi Universal Storage Platform V and is the answer not in the manual?

Hitachi Universal Storage Platform V Specifications

General IconGeneral
BrandHitachi
ModelUniversal Storage Platform V
CategoryStorage
LanguageEnglish

Related product manuals