Hitachi Virtual Storage Platform G370 User Manual

Hitachi Virtual Storage Platform G350 and
G370
88-03-2 x
Hardware Reference Guide
This document provides information about the system hardware components and the mechanical and
environmental specifications for the Hitachi Virtual Storage Platform G350 and G370 storage systems.
MK-97HM85012-03
November 2019

Hitachi Virtual Storage Platform G370 Specifications

General

Model	Hitachi Virtual Storage Platform G370
Form Factor	Rack-mountable
Drive Types	SSD, SAS HDD, NL-SAS HDD
Controller Type	Dual active controllers
RAID Levels	RAID 1, RAID 5, RAID 6
Host Interfaces	Fibre Channel, iSCSI, FCoE
Host Interface Types	Fibre Channel, iSCSI
Supported Operating Systems	Windows, Linux
Data Services	Thin Provisioning

Summary

Chapter 2: System Controllers

CBSS Controller Chassis and Front Panel

CBSS Controller Rear Panel and Power Supply

CBSL Controller Chassis and Front Panel

CBSL Controller Rear Panel and Power Supply

Front-End Module LEDs and Connectors

Chapter 3: Drive Trays

Small Form-Factor Drive Tray (DBS) Details

Large Form-Factor Drive Tray (DBL) Details

High-Density Intermix Drive Tray (DB60) Details

Chapter 4: Service Processor (SVP)

SVP Hardware Specifications

Lists the hardware specifications for the Windows 10 Enterprise SVP.

Service Processor Description and Ports

SVP Front and Rear Panel Interfaces

Chapter 5: Maintaining the Storage System

Appendix B: System Specifications

VSP G350 Mechanical Specifications

Provides mechanical specs for VSP G350 controller chassis, drive chassis, drive types, and host interfaces.

VSP G370 Mechanical Specifications

Provides mechanical specs for VSP G370 controller chassis, drive chassis, drive types, and host interfaces.

Electrical Specifications

Details electrical input power specifications, including voltage, frequency, and current ratings.

Environmental Specifications

Covers temperature, humidity, vibration, impact, altitude, gaseous contaminants, and acoustic noise.

Shared Memory Specifications

Appendix C: Network Access

TCP/IP Port Assignments for Communication

Lists default TCP/IP ports required for system operation and management.

Controller Connectivity and Ports

Physical Service Processor (SVP) Connectivity

Appendix D: Data and Power Cables

Fibre Channel Cable Specifications

iSCSI Cable Specifications

Appendix E: Power Distribution Units (PDUs)

Americas Single-Phase PDUs

Specifications for Americas single-phase PDUs (1P30A-8C13-3C19UL.P and 1P30A-15C13-3C19UL.P).

Americas Three-Phase PDUs

Specifications for Americas three-phase PDUs (3P30A-8C13-3C19UL.P and 3P30A-15C13-3C19UL.P).

APAC and EMEA Single-Phase PDUs

Specifications for APAC/EMEA single-phase PDUs (1P32A-9C13-3C19CE.P and 1P32A-18C13-3C19CE.P).

APAC and EMEA Three-Phase PDUs

Specifications for APAC/EMEA three-phase PDUs (3P16A-9C13-3C19CE.P, 3P16A-15C13-3C19CE.P, 3P32A-24C13-6C19CE.P).

Americas, APAC, EMEA Three-Phase PDU

Appendix G: Warning Labels on the Storage System

CBSS Controller Warning Labels

Identifies warning symbols and explanations for the CBSS controller.

CBSL Controller Warning Labels

Identifies warning symbols and explanations for the CBSL controller.

Small Form-Factor Drive Tray Warning Labels

Identifies warning symbols and explanations for the small form-factor drive tray.

Large Form-Factor Drive Tray Warning Labels

Identifies warning symbols and explanations for the large form-factor drive tray.

Dense Intermix Drive Tray Warning Labels

Identifies warning symbols and explanations for the dense intermix drive tray.

Dense Intermix Drive Tray Power Supply Warnings

Highlights caution and attention warnings for the dense intermix drive tray power supply.

CMA, Battery, and Component Warnings

Covers warning labels for CMA, battery, and other components.

Appendix H: Environmental Notices

Appendix I: Regulatory Compliance

Country Specifications and Certifications

FDA Radiation and EMI Regulations