Hitachi H 45MRY User Manual

*
ALTERNATIVE PARTS--- 4 --- 8 -- 06
PARTS
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
H 45MRY
OPTIONAL ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
STANDARD ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
103 959-141 CONNECTOR 50092 (10 PCS.) 1
104 953-327 CORD ARMOR D8.8 1
* 105 500-390Z CORD 1 (CORD ARMOR D8.8)
* 105 500-454Z CORD 1 (CORD ARMOR D8.8) FOR GBR (110V)
* 105 500-446Z CORD 1 (CORD ARMOR D8.8) FOR GBR (230V)
* 105 500-391Z CORD 1 (CORD ARMOR D8.8) FOR SUI
106 321-320 FAN GUIDE 1
107 953-174 HEX. HD. TAPPING SCREW D5X55 2
* 108 340-681C STATOR ASS’Y 110V 1 INCLUD. 109
* 108 340-681E STATOR ASS’Y 220V-230V 1 INCLUD. 109
109 930-703 BRUSH TERMINAL 2
110 930-804 TERMINAL M4.0 (10 PCS.) 1
111 982-631 WASHER (A) 1
112 608-VVM BALL BEARING 608VVC2PS2L 1
113 326-484 BEARING HOLDER 1
114 326-481 HOUSING ASS’Y 1
115 326-506 SPRING BASE 1
116 935-829 BRUSH CAP 2
117 999-073
CARBON BRUSH (AUTO STOP TYPE) (1 PAIR) 2
118 971-001 BRUSH HOLDER 2
119 938-477 HEX. SOCKET SET SCREW M5X8 2
120 326-504 TAIL COVER 1
121 302-089
TAPPING SCREW (W/FLANGE) D5X20 (BLACK) 2
122 326-488 COVER (A) 1
501 313-471 BULL POINT (SDS MAX) 280L 1
502 326-511 CASE (PLASTIC) 1
601 981-840
GREASE (A) FOR HAMMER. HAMMER DRILL (30G) 1
602 308-471
GREASE FOR HAMMER. HAMMER DRILL (70G) 1
603 980-927
GREASE FOR HAMMER. HAMMER DRILL (500G) 1
604 313-472 BULL POINT (SDS MAX) 400L 1
605 313-473 COLD CHISEL (SDS MAX) 280MM 1
606 313-474 COLD CHISEL (SDS MAX) 400MM 1
607 313-475 CUTTER (SDS MAX) W50X400L 1
608 313-476 SCOOP (SDS MAX) 400L 1
609 313-478 RAMMER (SDS MAX) 150MM X 150MM 1
610 313-477 BUSHING TOOL (SDS MAX) 1
611 313-479
SHANK (SDS MAX) FOR RAMMER, BUSHING TOOL 1
Printed in Japan
(060803N)

Hitachi H 45MRY Specifications

General

Brand	Hitachi
Model	H 45MRY
Category	Power Tool
Language	English