raidcom modify ldev -status discard_zero_page
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E11 0054 The page cannot be discarded because the pool
volume is being deleted or the Tier is being
reallocated.
CMDRJE Executing 2E11 0055 The operation cannot be performed because the
system pool volume is blocked.
CMDRJE Executing 2E11 8003 The operation cannot be performed because the
power supply is switched off.
CMDRJE Executing 2E14 0001 The page cannot be discarded because of the non-
operable status.
CMDRJE Executing 2E20 0000 The specified LDEV is not installed.
CMDRJE Executing 2E20 000A The operation cannot be performed because the
specified volume is being formatted.
CMDRJE Executing 2E30 000B The specified LDEV is not a virtual volume of
Dynamic Provisioning, Dynamic Tiering, or active
flash.
CMDRJE Executing 2E30 000F The specified LDEV is used as a journal volume.
CMDRJE Executing 2E30 0033 It is not associated to a pool.
CMDRJE Executing 2E30 0065 The specified volume is used by XRC.
CMDRJE Executing 2E30 0075 The page cannot be discarded because the
specified LDEV is a TSE-VOL.
CMDRJE Executing 2E30 0099 The specified LDEV is a volume of which Data
Direct Mapping attribute is enabled.
Get Command
Status
Async 2E30 0206 The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
CMDRJE Executing 2E31 001B The page of DP-VOL cannot be discarded because
the LU path to the host group whose host mode
option 97 is enabled is defined to the specified
LDEV.
CMDRJE Executing 2EE8 00E7 An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EF3 9F02 The specified operation cannot be performed
because it is not supported.
Troubleshooting
9-63
Command Control Interface User and Reference Guide
To Next Page
Loading...
