Table 9-36 SSB codes returned by raidcom modify ldev -status enable_fullallocation/
disable_fullallocation
raidcom modify ldev -status enable_fullallocation/disable_fullallocation
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
CMDRJE Executing 2E00 002F The specified value of the Full Allocation is invalid.
CMDRJE Executing 2E00 0030 Full Allocation cannot be specified to the specified
LDEV because the emulation type is not supported.
CMDRJE Executing 2E10 0065 The operation failed because the specified LDEV is
a DP-VOL that belongs to the pool of which
accelerated compression is enabled.
CMDRJE Executing 2E10 600B The associated pool is blocked.
CMDRJE Executing 2E10 600D The operation cannot be performed because a pool
volume is being deleted.
CMDRJE Executing 2E10 601B The free space in the specified pool is insufficient.
CMDRJE Executing 2E10 8000 The operation cannot be performed because
Storage Navigator or Device Manager - Storage
Navigator is in progress, another application is in
progress on the SVP, or the configuration is being
changed. Wait a while, and then retry the
operation.
CMDRJE Executing 2E11 001B The specified LDEV is blocked.
CMDRJE Executing 2E20 0000 LDEV is not installed.
CMDRJE Executing 2E30 000B The specified LDEV is not DP-VOL.
CMDRJE Executing 2E30 0099 The specified LDEV is a volume of which Data
Direct Mapping attribute is enabled.
Get Command
Status
Async 2E30 0206 The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
Get Command
Status
Async 2E30 0209 The operation cannot be performed because the
specified LDEV is a volume for which the capacity
saving setting is enabled.
CMDRJE Executing 2EE8 00EE The command cannot be accepted because the
DKC is busy. After a while, execute the same
command.
CMDRJE Executing 2EE8 FEEC An internal error occurred.
CMDRJE Executing 2EF3 9F02 The specified operation cannot be performed
because it is not supported.
9-64
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
