Table 9-37 SSB codes returned by raidcom modify ldev -quorum_enable
raidcom modify ldev -quorum_enable
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
CMDRJE Executing 2E00 8000 The device type is invalid.
CMDRJE Executing 2E00 8001 The serial number is invalid.
CMDRJE Executing 2E00 A001 The quorum disk ID is out of settable range.
Get Command
Status
Async 2E10 0005 The specified LDEV is used for Volume Migration.
Get Command
Status
Async 2E10 0057 The specified LDEV cannot be configured because
the LDEV is a virtual volume.
Get Command
Status
Async 2E10 0201 The operation failed because the T10 PI attribute
of the specified LDEV is enabled.
Get Command
Status
Async 2E10 0202 The specified volume belongs to the resource
group of NAS_Platform_System_RSG.
Get Command
Status
Async 2E10 A001 The specified quorum disk ID is being used.
Get Command
Status
Async 2E10 A003 The specified quorum disk is in processing.
Get Command
Status
Async 2E10 A005 The specified quorum disk is used as the quorum
disk of the different device.
Get Command
Status
Async 2E10 A006 The specified LDEV is used as the quorum disk.
Get Command
Status
Async 2E10 A007 The operation failed because the quorum disk was
inaccessible.
Get Command
Status
Async 2E11 001B The specified LDEV is blocked.
CMDRJE Executing 2E11 0053 The specified LDEV is used for other operation.
Get Command
Status
Async 2E11 410B The external volume is inaccessible.
Get Command
Status
Async 2E11 410C An unformatted external volume is used. Format
the external volume, then retry the operation.
Get Command
Status
Async 2E11 8014 The command cannot be accepted. After a while,
execute the same command.
Get Command
Status
Async 2E13 0001 The specified LDEV is not the first LDEV that
belongs to the external volume group.
CMDRJE Executing 2E20 0000 LDEV is not installed.
Get Command
Status
Async 2E20 000E The specified LDEV is not an external volume.
Troubleshooting
9-65
Command Control Interface User and Reference Guide
To Next Page
Loading...
