Hitachi HUS VM - Page 390

raidcom modify ldev -quorum_enable
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E21 810A A shared memory is not installed.
Get Command
Status
Async 2E30 0005 Cache Residency Manager is set to the specified
volume.
Get Command
Status
Async 2E30 0007 A path is defined to the specified volume.
Get Command
Status
Async 2E30 000E The specified LDEV is used as a pool volume.
Get Command
Status
Async 2E30 000F The specified LDEV is used as a journal volume.
Get Command
Status
Async 2E30 0010 The specified volume is used as a command
device.
Get Command
Status
Async 2E30 004E Data Retention Utility is set to the specified
volume.
Get Command
Status
Async 2E30 0074 The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
Get Command
Status
Async 2E30 008E The emulation type of the specified LDEV is not
OPEN-V.
Get Command
Status
Async 2E30 0092 The specified LDEV cannot be used because the
size of LDEV is less than the minimum capacity of
the quorum disk.
Get Command
Status
Async 2E30 0099 The specified LDEV is a volume of which Data
Direct Mapping attribute is enabled.
CMDRJE
Get Command
Status
Executing/
Async
2EE8 FEEC Internal error occurred.
Table 9-38 SSB codes returned by raidcom modify ldev -quorum_disable
raidcom modify ldev -quorum_disable
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
Get Command
Status
Async 2E10 A002 The specified LDEV is not a quorum disk.
Get Command
Status
Async 2E10 A003 The specified quorum disk is in processing.
Get Command
Status
Async 2E10 A004 The pair using the specified quorum disk exists.
9-66
Troubleshooting
Command Control Interface User and Reference Guide