raidcom add snap_pool
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E30 6004 The specified pool attribute differs from the pool
attribute of existed pool.
Get Command
Status
Async 2E31 0015 The RAID level of the specified LDEV is different
from the RAID level of the other pool volumes.
Get Command
Status
Async 2E31 0016 There is a blocked pool volume.
Get Command
Status
Async 2E31 0018 External volumes whose cache modes are different
are included.
CMDRJE Executing 2E31 6001 The POOL Name is duplicated with another pool.
Get Command
Status
Async 2E31 6004 The pool cannot include volumes in different RAID
levels because the pool cannot include those
volumes. Or the pool cannot include the RAID 1
volumes and the volumes of other RAID levels
together.
Get Command
Status
Async 2E31 6005 The pool cannot include both internal volumes and
external volumes because the pool is not set to
Mixable.
Get Command
Status
Async 2E31 9000 The usage capacity exceeds the license capacity of
program product.
CMDRJE
Get Command
Status
Executing
Async
2EE7 FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
Get Command
Status
Async 2EE7 FFFF An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EF3 0002 The specified parameter is invalid. Check the
Command Control Interface Command Reference.
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Table 9-47 SSB codes returned by raidcom add snapshot
raidcom add snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
CMDRJE Executing 2E00 0013 A pair cannot be created because there are not
enough cache management devices.
CMDRJE Executing 2E00 0028 The command ends abnormally because the
volume whose LDEV number is out of range is
Troubleshooting
9-83
Command Control Interface User and Reference Guide
To Next Page
Loading...
