Hitachi HUS VM - Page 408

raidcom add snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
specified as the P-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E00 0029 The command ends abnormally because the
volume whose LDEV number is out of range is
specified as the S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E00 6000 The specified pool ID is out of the range.
CMDRJE Executing 2E00 9701 There are not enough required input parameters.
CMDRJE Executing 2E10 0020 A pair cannot be created because the volume that
has the size exceeding the supported size is
specified as the P-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0021 A pair cannot be created because the volume
exceeded the support size is specified as the S-VOL
of a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 0022 A pair cannot be created because the V-VOL is
specified as the P-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0023 A pair cannot be created because the pool-VOL is
specified as the P-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0024 A pair cannot be created because the journal
volume of Universal Replicator is specified as the P-
VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 0025 The command ends abnormally because the LUSE
volumes of different structure are specified as the
P-VOL and the S-VOL.
CMDRJE Executing 2E10 0026 A pair cannot be created because the volume in
which the VMA is set is specified as the P-VOL.
CMDRJE Executing 2E10 0027 A pair cannot be created because the external
volume is specified as the S-VOL of a Thin Image
pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0028 A pair cannot be created because the volume other
than V-VOL is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0029 A pair cannot be created because the pool-VOL is
specified as the S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 002A A pair cannot be created because the volume (the
data volume or the journal volume) of the
Universal Replicator pair that is in the intermediate
9-84
Troubleshooting
Command Control Interface User and Reference Guide