raidcom add snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
site of the 3DC cascading configuration is specified
as the S-VOL of a Thin Image pair or a Copy-on-
Write Snapshot pair.
CMDRJE Executing 2E10 002B A pair cannot be created because the P-VOL of a
Universal Replicator pair is specified as the S-VOL
of a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 002C A pair cannot be created because the S-VOL of a
Universal Replicator pair is specified as the S-VOL
of a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 002D A pair cannot be created because the journal
volume of the Universal Replicator is specified as
the S-VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 002E The command ends abnormally because the
volume to which S-VOL Disable option is set is
specified as the S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 002F A pair cannot be created because the volume to
which VMA is set is specified as the S-VOL of a Thin
Image pair or aCopy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0030 The command ends abnormally because the
volumes of different Max LBA size are specified as
the P-VOL and S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0031 The command ends abnormally because the
volumes whose the number of slots is different are
specified as the P-VOL and S-VOL of a Thin Image
pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0032 A pair cannot be created because the Dynamic
Provisioning V-VOL is specified as the S-VOL of a
Thin Image pair or the specified Thin Image pair
does not exist.
CMDRJE Executing 2E10 0033 The command ends abnormally because the
ShadowImage reserved volume is specified as the
P-VOL of a Thin Image pair or aCopy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 0034 The command ends abnormally because the
Volume Migration source volume is specified as the
P-VOL of a Thin Image pair or aCopy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 0035 The command ends abnormally because the
Volume Migration target volume is specified as the
P-VOL of a Thin Image pair or aCopy-on-Write
Snapshot pair.
Troubleshooting
9-85
Command Control Interface User and Reference Guide
To Next Page
Loading...
