raidcom add snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Provisioning V-VOL in capacity expanding is
specified as the P-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0042 A pair cannot be created because the page discard
(reclaim zero pages) is being executed by a SCSI
command from the Host to the specified P-VOL.
CMDRJE Executing 2E10 0045 A pair cannot be created because the P-VOL of a
TrueCopy pair is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0046 A pair cannot be created because the S-VOL of a
TrueCopy pair is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0049 The command ends abnormally because the
ShadowImage pair is being resynchronized when
the volume is shared between the P-VOL of a Thin
Image/Copy-on-Write Snapshot pair and the P-VOL
of a ShadowImage pair.
CMDRJE Executing 2E10 004A The command ends abnormally because the
ShadowImage pair status is other than PSUS when
the volume is shared between P-VOL of a Thin
Image/Copy-on-Write Snapshot pair and the S-VOL
of a ShadowImage pair.
CMDRJE Executing 2E10 004E The operation cannot be performed because the P-
VOL of the ShadowImage pair on which the Quick
Restore is being operated is specified as the P-VOL
of a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 0051 The pair operation cannot be performed because
the volume which specifies the volume using two
mirrors cannot accept the specified command in
the following configurations using three Universal
Replicator sites.
• 3DC multi target configuration
• 3DC cascade configuration
• Delta resync configuration
CMDRJE Executing 2E10 0052 A Thin Image pair cannot be created because the
pair status of all Thin Image pairs sharing the
specified P-VOL is PSUE.
CMDRJE Executing 2E10 0056 The specified volume cannot be used for the Thin
Image pair operation because the virtual LDEV ID
is deleted.
CMDRJE Executing 2E10 005B The Thin Image pair operation cannot be
performed because the virtual storage machine of
the specified P-VOL is different from the virtual
storage machine of the specified S-VOL.
Troubleshooting
9-87
Command Control Interface User and Reference Guide
To Next Page
Loading...
