raidcom add snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 0206 The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
CMDRJE Executing 2E30 600E A pair cannot be created because the attribute of
the pool is other than Thin Image or Copy-on-Write
Snapshot.
CMDRJE Executing 2E31 9002 A pair cannot be created because the capacity
exceeds the licensed capacity.
CMDRJE Executing 2E31 9701 For creation of a pair with the cascade or clone
attribute, a Dynamic Provisioning V-VOL is not
specified for the S-VOL.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing 2EC6 FEEC An internal error occurred. Call Hitachi Data
Systems customer support.
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Table 9-48 SSB codes returned by raidcom modify snapshot
raidcom modify snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
CMDRJE Executing 2E00 000B The MU number exceeds the maximum.
CMDRJE Executing 2E00 0028 The command ends abnormally because the volume
whose LDEV number is out of range is specified as
the P-VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E02 9701 The command cannot be executed because the
clone specification of the input parameter and the
clone attribute of a Thin Image pair to be operated
do not match.
CMDRJE Executing 2E10 0033 The command ends abnormally because the
ShadowImage reserved volume is specified as the
P-VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 0034 The command ends abnormally because the Volume
Migration source volume is specified as the P-VOL of
a Thin Image pair or a Copy-on-Write Snapshot
pair.
Troubleshooting
9-93
Command Control Interface User and Reference Guide
To Next Page
Loading...
