Hitachi HUS VM - Page 427

raidcom map snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E10 002E The command ends abnormally because the
volume to which S-VOL Disable option is set is
specified as the S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 002F The command ends abnormally because the
volume to which VMA is set is specified as the S-
VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 0030 The command ends abnormally because the
volumes of different Max LBA size are specified as
the P-VOL and S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0031 The command ends abnormally because the
volumes whose the number of slots is different are
specified as the P-VOL and S-VOL of a Thin Image
pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0032 A pair cannot be created because the Dynamic
Provisioning V-VOL is specified as the S-VOL of a
Thin Image pair or the specified Thin Image pair
does not exist.
CMDRJE Executing 2E10 0037 The command ends abnormally because the P-VOL
of a ShadowImage pair is specified as the S-VOL of
a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 0038 The command ends abnormally because the S-VOL
of a ShadowImage pair is specified as the S-VOL of
a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 003A The command ends abnormally because the
Volume Migration source volume is specified as the
S-VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 003B The command ends abnormally because the
Volume Migration target volume is specified as the
S-VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 003E The command ends abnormally because the
volume of Universal Replicator pair for the delta
resync operation is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0045 The command ends abnormally because the P-VOL
of a TrueCopy pair is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0046 The command ends abnormally because the S-VOL
of a TrueCopy pair is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
Troubleshooting
9-103
Command Control Interface User and Reference Guide