Table 9-51 SSB codes returned by raidcom map snapshot
raidcom map snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0028 The command ends abnormally because the
volume whose LDEV number is out of range is
specified as the P-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E00 0029 The command ends abnormally because the
volume whose LDEV number is out of range is
specified as the S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0020 The command ends abnormally because the
volume that has the size exceeding the supported
size is specified as the P-VOL of a Thin Image pair
or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0025 The command ends abnormally because the LUSE
volumes of different structure are specified as the
P-VOL and the S-VOL.
CMDRJE Executing 2E10 0027 The command ends abnormally because the
external volume is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0028 The command ends abnormally because the
volume other than V-VOL is specified as the S-VOL
of a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 0029 The command ends abnormally because the pool-
VOL is specified as the S-VOL of a Thin Image pair
or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 002A The command ends abnormally because the
volume (the data volume or the journal volume) of
the Universal Replicator pair that is in the
intermediate site of the 3DC cascading
configuration is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 002B The command ends abnormally because the P-VOL
of a Universal Replicator pair is specified as the S-
VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 002C The command ends abnormally because the S-VOL
of a Universal Replicator pair is specified as the S-
VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E10 002D The command ends abnormally because the
journal volume of the Universal Replicator is
specified as the S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
9-102
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
