raidcom map snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E21 9306 The virutal LDEV ID for a virtual storage machine is
not defined on the specified LDEV.
CMDRJE Executing 2E21 930A The virtual storage machine with the specified
serial number is not found.
CMDRJE Executing 2E30 0077 The command ends abnormally because the
volume is already used as the P-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair is
specified as the S-VOL.
CMDRJE Executing 2E30 0078 The command ends abnormally because the
volume is already used as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair is
specified as the S-VOL.
CMDRJE Executing 2E30 007C The command ends abnormally because the
volume other than OPEN-V is specified as the S-
VOL of a Thin Image pair or a Copy-on-Write
Snapshot pair.
CMDRJE Executing 2E30 007D The command ends abnormally because the
volume whose command device is set is specified
as the S-VOL of a Thin Image pair or a Copy-on-
Write Snapshot pair.
CMDRJE Executing 2E30 007F The command ends abnormally because the
volume having no path definition is specified as the
S-VOL of a Thin Image pair or the specified Thin
Image pair does not exist.
CMDRJE Executing 2E30 0081 The command ends abnormally because the
external volume mapped for the online data
migration is specified as the S-VOL of a Thin Image
pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E30 008F The command ends abnormally because the
specified P-VOL is not a P-VOL of a Thin Image
pair.
CMDRJE Executing 2E30 0099 The specified LDEV is a volume of which Data
Direct Mapping attribute is enabled.
CMDRJE Executing 2E30 0201 The specified LDEV is an external volume of which
Data Direct Mapping attribute is enabled.
CMDRJE Executing 2E30 0202 The specified LDEV is a virtual volume of which
Data Direct Mapping attribute is enabled.
CMDRJE Executing 2E30 0206 The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
CMDRJE Executing 2E30 0207 The operation cannot be performed because the
specified volume is a DP-VOL with the SLU
attribute.
Troubleshooting
9-105
Command Control Interface User and Reference Guide
To Next Page
Loading...
