raidcom map snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 2E30 The specified LDEV is a V-VOL for which the Data
Direct Mapping attribute is enabled.
CMDRJE Executing 2E31 9701 For mapping pairs with the cascade or clone
attribute, the Dynamic Provisioning V-VOL is not
specified as an S-VOL.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing B980 B903 The operation cannot be performed because the
selected resource belongs to
NAS_Platform_System_RSG.
Table 9-52 SSB codes returned by raidcom replace snapshot
raidcom replace snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0029 The command ends abnormally because the
volume whose LDEV number is out of range is
specified as the S-VOL of a Thin Image pair or a
Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0020 The command ends abnormally because the
volume that has the size exceeding the supported
size is specified as the P-VOL of a Thin Image pair
or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0025 The command ends abnormally because the LUSE
volumes of different structure are specified as the
P-VOL and the S-VOL.
CMDRJE Executing 2E10 0027 The command ends abnormally because the
external volume is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 0028 The command ends abnormally because the
volume other than V-VOL is specified as the S-VOL
of a Thin Image pair or a Copy-on-Write Snapshot
pair.
CMDRJE Executing 2E10 0029 The command ends abnormally because the pool-
VOL is specified as the S-VOL of a Thin Image pair
or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E10 002A The command ends abnormally because the
volume (the data volume or the journal volume) of
the Universal Replicator pair that is in the
intermediate site of the 3DC cascading
configuration is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
9-106
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
