raidcom add rcu
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 840A The port attribute is not Initiator (MCU).
CMDRJE Executing 2E30 840E The command cannot be executed with the
specified port attribute.
Get Command
Status
Async 2E31 3001 The command cannot be executed because the
RCU identification code of a path is invalid.
Get Command
Status
Async 2E31 3002 The operation cannot be performed because the
remote storage system does not support the path
between CUs.
Get Command
Status
Async 2E31 3101 The command cannot be executed because the
serial number is not unified in the specified path.
CMDRJE Executing 2ED6 00EE The command cannot be accepted because the
DKC is busy. After a while, execute the same
command.
Get Command
Status
Async 2ED6 3005 An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2ED6 3300 The value of SSID on the remote storage system is
invalid.
CMDRJE Executing 2EF3 3002 The specified parameter is invalid. Check the
Command Control Interface Command Reference.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
Table 9-62 SSB codes returned by raidcom delete ldev
raidcom delete ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
Get Command
Status
Async 2E00 000E This command does not support the emulation
type of the specified LDEV.
Get Command
Status
Async 2E00 0016 The command cannot be executed by receiving
multiple operations for the same LDEV.
Get Command
Status
Async 2E10 0000 The specified LDEV is used for a pair of
ShadowImage/Thin Image/Copy-on-Write
Snapshot/Volume Migration or as a relationship of
Compatible FlashCopy® V2/Compatible Software
for IBM® FlashCopy® SE.
9-124
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
