Hitachi HUS VM - Page 450

raidcom delete ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E11 0004 An LDEV that is in the state of formatting is
included in the parity group of the target LDEV.
Get Command
Status
Async 2E11 0005 An LDEV that is in the state of executing quick
format is included in the parity group of the target
LDEV.
Get Command
Status
Async 2E11 001B The specified LDEV is blocked.
CMDRJE Executing 2E11 0053 The specified LDEV is used in another operation.
Get Command
Status
Async 2E11 0102 The parity group of the target LDEV is in the state
of correction copy.
CMDRJE Executing 2E11 0153 The parity group or the external volume group that
the specified LDEV is belongs to is used in another
operation.
Get Command
Status
Async 2E11 0202 The external volume group with the Data Direct
Mapping attribute which is allocated to the
specified LDEV is not in the state of disconnected.
Get Command
Status
Async 2E11 6004 The operation cannot be performed because pools
are blocked.
Get Command
Status
Async 2E11 6008 The operation cannot be performed because the
pool linked with the specified LDEV is in the
unusable status.
Get Command
Status
Async 2E11 8004 The operation cannot be performed because the
internal processing is in progress.
Get Command
Status
Async 2E11 800F The operation failed because multiple versions of
DKCMAIN microcode are included.
CMDRJE Executing 2E11 8010 The storage system is in internal process, or the
configuration changing processes are conflicting.
Get Command
Status
Async 2E11 8108 The operation cannot be performed because there
is blocked part in the system.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE
Get Command
Status
Executing/
Async
2E20 0000 LDEV is not installed.
CMDRJE Executing 2E30 0007 An LU path has been defined.
Get Command
Status
Async 2E30 000A The specified LDEV is used for a Dynamic
Provisioning.
Get Command
Status
Async 2E30 000C The specified LDEV is used as a quorum disk.
Get Command
Status
Async 2E30 000E The specified LDEV is used as a pool volume.
9-126
Troubleshooting
Command Control Interface User and Reference Guide