raidcom delete ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E30 000F The specified LDEV is used as a journal volume.
Get Command
Status
Async 2E30 0006 The specified LDEV is used in the FICON® Data
Migration.
Get Command
Status
Async 2E30 0010 The specified LDEV is a command device.
CMDRJE
Get Command
Status
Executing/
Async
2E30 0013 The specified volume cannot be deleted because it
is a LUSE volume.
Get Command
Status
Async 2E30 0014 The specified LDEV is used as a reserved volume of
Volume Migration.
Get Command
Status
Async 2E30 0018 This is a volume that the Data Retention Utility is
set.
Get Command
Status
Async 2E30 001A Volume Security is set to the specified LDEV.
Get Command
Status
Async 2E30 001E The specified LDEV cannot be deleted because of
online from the mainframe host.
Get Command
Status
Async 2E30 002C The specified LDEV cannot be operated because it
has not been formatted.
Get Command
Status
Async 2E30 004E The specified LDEV is a Data Retention Utility/
Volume Retention Manager attribute device.
Get Command
Status
Async 2E30 0053 This is a volume that the Volume Retention
Manager is set.
Get Command
Status
Async 2E30 0054 The specified LDEV is used as a Compatible
FlashCopy® V2 or a Compatible Software for IBM®
FlashCopy® SE relationship.
Get Command
Status
Async 2E30 0055 The specified LDEV is used for a Volume Migration.
Get Command
Status
Async 2E30 0056 The specified LDEV is used for a Volume Migration
Get Command
Status
Async 2E30 0057 The specified LDEV is used as a system disk.
Get Command
Status
Async 2E30 0058 The specified LDEV is used as a system disk.
Get Command
Status
Async 2E30 0060 The specified LDEV is a command device.
Get Command
Status
Async 2E30 0074 The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
Get Command
Status
Async 2E30 0096 The specified LDEV is used as an ALU.
Troubleshooting
9-127
Command Control Interface User and Reference Guide
To Next Page
Loading...
