Hitachi HUS VM - Page 452

raidcom delete ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E30 0097 The specified LDEV is used as an SLU.
Get Command
Status
Async 2E30 0206 The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
Get Command
Status
Async 2E30 4102 The specified volume is used as a TrueCopy.
Get Command
Status
Async 2E30 4103 The specified volume is used as a TrueCopy.
Get Command
Status
Async 2E30 4104 The specified volume is used as a ShadowImage
pair volume, a Thin Image pair volume, or a
FICON® Data Migration volume.
Get Command
Status
Async 2E30 4105 The specified volume is used as a ShadowImage
pair volume, a Thin Image pair volume, or a
FICON® Data Migration volume.
Get Command
Status
Async 2E30 4107 The specified volume is used as a ShadowImage.
Get Command
Status
Async 2E30 4108 The specified LDEV is used as a reserved volume of
Volume Migration.
Get Command
Status
Async 2E31 0001 The target LDEV is a quorum disk and cannot be
deleted.
CMDRJE Executing 2EE8 00EE The command cannot be accepted. After a while,
execute the same command.
CMDRJE Executing 2EE8 00F0 The specified command cannot be accepted
because the command is not supported.
Get Command
Status
Async 2EE8 0A18 An internal error occurred.
CMDRJE
Get Command
Status
Executing/
Async
2EE8 FEEC An internal error occurred. Call Hitachi Data
Systems customer support.
Get Command
Status
Async 2EE8 FFFB An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
9-128
Troubleshooting
Command Control Interface User and Reference Guide