Hitachi HUS VM - Page 454

raidcom add hba_wwn
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 B9D8 The WWN which belongs to the specified host
group is registered in another SPM group.
CMDRJE Executing B957 B9DA The operation cannot be performed because it is
locked in another session.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
Table 9-65 SSB codes returned by raidcom set hba_wwn
raidcom set hba_wwn
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 4087 The value of host group ID exceeds the maximum.
CMDRJE Executing B957 4089 The host group is not installed.
CMDRJE Executing B957 408A The attribute of the specified port is Initiator or
External.
CMDRJE Executing B957 4385 The specified WWN does not exist.
CMDRJE Executing B957 438B The specified WWN nickname is already used in the
same port.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
Table 9-66 SSB codes returned by raidcom reset hba_wwn
raidcom reset hba_wwn
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 4087 The value of Host group ID exceeds the maximum.
CMDRJE Executing B957 4089 The host group is not installed.
CMDRJE Executing B957 408A The attribute of the specified port is Initiator or
External.
9-130
Troubleshooting
Command Control Interface User and Reference Guide