raidcom reset hba_wwn
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 4385 The specified WWN does not exist.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
Table 9-67 SSB codes returned by raidcom add copy_grp
raidcom add copy_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 000B The number of MU# exceeds the maximum.
CMDRJE Executing 2E00 2100 Invalid device number.
CMDRJE Executing 2E00 5000 The specified journal ID exceeds the range.
CMDRJE Executing 2E20 2100 A device group is not installed.
CMDRJE Executing 2E22 2000 There is a copy group.
CMDRJE Executing 2E23 2000 The number of copy groups in the system reached
the maximum.
CMDRJE Executing 2E30 2100 The specified device group is already defined in the
other copy group.
CMDRJE Executing 2E31 0012 There is an LDEV in the device group that has an
undefined device name.
CMDRJE Executing 2E31 0013 The same device names of LDEV are in the device
group.
CMDRJE Executing 2E31 0014 The same LDEVs are in the copy group.
Invalid Character Executing - - Unavailable character is included in the name of
copy group.
Table 9-68 SSB codes returned by raidcom delete copy_grp
raidcom delete copy_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E20 2000 The copy group is not installed.
Invalid Character Executing - - Unavailable character is included in the name of
copy group.
Troubleshooting
9-131
Command Control Interface User and Reference Guide
To Next Page
Loading...
