Table 9-69 SSB codes returned by raidcom modify port -port_speed
raidcom modify port -port_speed
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 01C1 The specified LDEV is used as a quorum disk.
CMDRJE Executing B955 020F The specified LDEV is not installed.
CMDRJE Executing B955 0304 An LU path or a logical path has been defined.
CMDRJE Executing B955 0404 An LU path or a logical path has been defined.
CMDRJE Executing B955 040F An internal error occurred.
CMDRJE Executing B955 044C The specified AL-PA is invalid.
CMDRJE Executing B955 054E The specified topology is invalid.
CMDRJE Executing B955 05A6 The other than "fabric on" cannot be specified
when specifying a topology of the package for
Fibre Channel over Ethernet.
CMDRJE Executing B955 05A7 The other than "P-to-P (point to point)" cannot be
specified when specifying a topology of the
package for Fibre Channel over Ethernet.
CMDRJE Executing B955 060F The specified LDEV is not installed.
CMDRJE Executing B955 06C0 The specified LDEV is being used as a volume of a
GAD pair.
CMDRJE Executing B955 06C1 The specified LDEV is used as a quorum disk.
CMDRJE Executing B955 06C2 The specified LDEV is used for a TrueCopy pair or a
Universal Replicator pair.
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 104F The program product is not installed.
CMDRJE Executing B955 113D Invalid host speed is set for 4Gbps fibre adapter.
The available host speeds are AUTO, 1G, 2G, and
4G only.
CMDRJE Executing B955 113E Invalid host speed is set for the specified fibre
adapter.
CMDRJE Executing B955 113F Invalid host speed is set for 8Gbps fibre adapter.
The available host speeds are AUTO, 2G, 4G, and
8G only.
CMDRJE Executing B955 11A5 The other than "10G" cannot be specified when
specifying a host speed of the package for Fibre
Channel over Ethernet.
CMDRJE Executing B955 11AE Invalid host speed is set for 16Gbps fibre adapter.
The available host speeds are AUTO, 2G, 4G, and
8G only.
CMDRJE Executing B955 12AF The combination of the specified host speed and
the topology FC-AL set for the fibre channel
9-132
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
