Hitachi HUS VM - Page 457

raidcom modify port -port_speed
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
adapter is not supported. See the Provisioning
Guide of your system for supported combinations
of data transfer speed and type of connection.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
Table 9-70 SSB codes returned by raidcom modify port -port_attribute
raidcom modify port -port_attribute
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E00 8404 The target channel adapter or the channel board
does not support the specified port attribute.
CMDRJE Executing 2E10 8001 The operation cannot be performed because
another application, for example Storage
Navigator, Device Manager - Storage Navigator,
and SVP is used.
CMDRJE Executing 2E10 8400 The specified port is blocked.
CMDRJE Executing 2E10 8402 There is a pair for TrueCopy/Universal Replicator
that is using the specified port.
CMDRJE Executing 2E10 8403 There is a pair for TrueCopy/Universal Replicator
that is using the specified port.
CMDRJE Executing 2E11 800D The storage system is in the state of start-up. Wait
for a while, then retry the operation.
CMDRJE Executing 2E13 8401 The port attribute cannot be changed because it is
used for the iSCSI path of the remote replication.
CMDRJE Executing 2E13 8402 iSNS is set for the specified port.
CMDRJE Executing 2E20 8400 The specified port is not installed.
CMDRJE Executing 2E30 8403 There is a path for TrueCopy/Universal Replicator
in the specified port.
CMDRJE Executing 2E30 8406 There is an external VOL path in the specified port.
CMDRJE Executing 2E30 8407 There is a path for TrueCopy/Universal Replicator
in the specified port.
CMDRJE Executing 2E30 8408 There is a path for TrueCopy/Universal Replicator
in the specified port.
CMDRJE Executing 2E30 8409 An LU path has been defined.
CMDRJE Executing 2ED0 84FC An internal error occurred.
Troubleshooting
9-133
Command Control Interface User and Reference Guide