raidcom modify port -isns_server_address
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 10C5 The specified IP address of the iSNS server is
incorrect by the following reasons:
• The loop-back address, broadcast address or
the IP address beginning with 255 has been
set as the IPv4 address.
• The multicast address or the loop-back
address has been set as the IPv6 address, or
the address has not been specified yet.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-83 SSB codes returned by raidcom modify port -keep_alive_timer
raidcom modify port -keep_alive_timer
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 10BE The invalid value is specified for the Keep Alive
timer.
CMDRJE Executing B955 10FB The attribute of the specified port is Initiator or
External.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-84 SSB codes returned by raidcom modify port -mtu
raidcom modify port -mtu
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 10B0 The invalid value is specified for the Ethernet MTU
size.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
9-138
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
